[an error occurred while processing this directive]
Posted by HeatPro on May 03, 2006 at 17:46:20:
In Reply to: Re: question regarding Ergomax repipe posted by Dave on May 02, 2006 at 12:04:34:
Two 3/4 holes are equal in cross-section to a 1-inch cross-section, therefore, doing so restricts a 1-1/2 pipe to a 1-inch which requires two 1-inch to make a 1-1/2. So his reason for making the cross-section 1/4 the size is to correct a possible restriction elsewhere.