VOKERA 96E HEATING WORKS,BUT NOT HOT WATER

Posted by Mark on May 07, 2006 at 07:29:00:

Just had major surgery on my leg , my wifes horse had to be put down and the the boiler breaks (they say things happen in three's)
When you switch the heating to on the boiler fires up and the radiators heat up.Now switch the heating off.

At any time now you turn on a hot tap in the house the boiler should flash up and start producing hot water for the taps, but nothing happens at all at the boiler . No flame no noise nothing!

If , (whilst the heating is on )I switch the selector switch from "combined heating and hot water" to "just hot water" the flame in the boiler goes out (so does the little green light that indicates all is well).

The water here in Scotland is very soft so no scaling occurs , as I have read in many answers to peoples problems.

I would be so happy if I could find any manual instructions or a fault finding guide for the VOKERA EXCELL 96E or if anyone had an idea of what may be the problem .

Many thanks , Mark

Follow Ups:

• Re: VOKERA 96E HEATING WORKS,BUT NOT HOT WATER Kostas 20:40:42 8/19/2007 (0)
• Re: VOKERA 96E HEATING WORKS,BUT NOT HOT WATER Coldwaterworries 03:59:49 11/14/2006 (0)
• Re: VOKERA 96E HEATING WORKS,BUT NOT HOT WATER MARK 15:52:25 5/09/2006 (0)

Post a Followup