[an error occurred while processing this directive]
Posted by BoilingMan on May 24, 2002 at 11:18:08:
In Reply to: Maintain the temperature and measure the temperature of water vapor posted by Qiu Jiayou on May 23, 2002 at 06:08:44:
: I am doing experiment with water vapor. Water vapor comes from a evaporator with the flow rate is about 500 ml/min. How can I heat the water vapor from its saturation temper to higher temperature.
: For example, 60 mbar, the saturation temperature is about 36 degree C, if I want to heat the temperature up to 50 degree C. Is there a convenient way to heat to? and how can I measure the temperature of water vapor at such a low pressure.
: Thank you
To maintain the pressure you can connect some little valve or kinda clamp on output end,and manipulating it you can change the pressure in the system.