Posted by PEDRO ORTEGA on July 20, 2000 at 17:15:09:
In Reply to: Re: Measuring Boiler Efficiency posted by John C. Ellis on March 06, 2000 at 12:13:25:
:
: If you are doing this for a scholastic paper, then follow the outline for the heat loss method found in ASME 4.2. If you want a quick, reasonably precise method then do the I/O (input-output) method. This efficiency is as follows:
: E= W1(H1-h1) + W2(H2-h2)/C
: Where W1 = main steam flow (lb/hr)
: W2 = reheat steam flow (lb/hr)
: H1 = Enthalpy main steam (btu/lb)
: H2 = Enthalpy reheat steam (btu/lb)
: h1 = Enthalpy feed water (btu/lb)
: h2 = Enthalpy steam enter reheater (btu/lb)
: C = Total heat input from fuel (btu/lb)
: Hope this helps.