[an error occurred while processing this directive]
Posted by john on October 15, 2010 at 07:12:05:
I'm using a spirovent (built in air vent) before circulator on the supply piping. I'm running a half inch line from the connection at the bottom of spirovent down to a tee, which connects to makeup water and expansion tank.
I'd like to place the expansion tank about 5 feet away from all the other piping due to space considerations.
Is there a problem w/ running about 5 feet of half inch pipe to expansion tank instead of using a little nipple to connect it near makeup water and sprirovent?
thanks.