[an error occurred while processing this directive]
Posted by John Primo on November 17, 2007 at 10:49:38:
In Reply to: Optimal Temperature Settings on Boiler? posted by Kyle on November 17, 2007 at 01:20:35:
The standerd recomendation in any burnham boiler I/O manual is to have the high at 210 and the low at 190 with a 10 Degree Differational. The differational setting just means that the boiler will be set to opperate with-in 10 Degs of the high and low setting, The water should not get hotter then 250 Degs both for pratical and wear and tare resonings.
The High and Low must be 20Degs apart IE 210/190 or 200/180 etc etc..........