[an error occurred while processing this directive]
Posted by steve on September 28, 2005 at 19:16:35:
In Reply to: Re: pex vs copper posted by Joe Brix on September 07, 2005 at 11:32:21:
: Pex would be great if you plan on "home running" lines back to a maifold on the floor or back to the boiler for better zoning control. This would allow you to use larger PEX for the risers and then cut down to 1/2" PEX to feed rad loops in each room.
Make sure you buy the right PEX
The one for heat not Domestic H20